Description
The DDI-11 DataPort Accessory Card is designed for use with QSC amplifiers equipped with a
DataPort connector. It provide an easy way to exploit the features of the DataPort without using
QSControl or an accessory.
Through a terminal block with eight screw clamps on the DDI-11, the DataPort offers these
connections:
- Balanced input to Channel 1.
- Balanced input to Channel 2.
- Analog (signal) ground.
- Chassis ground.
- Standby control; connecting this terminal to chassis ground shuts off the power supply,
except on ISA Series amplifiers. - +15 volts (at up to 300 mA), except on ISA and the original PowerLight Series* amplifiers.
The screw clamp terminals can accept stranded wire as large as 17 AWG (1 mm2) or solid wire as large as 16 AWG (1.5 mm2)
QSC PN: DDI-11
